Download the thesis about separation of carbon dioxide✅ Word Document

M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...

Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...

Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...

A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...

A master's thesis in the field of chemical engineering, abstract of biodiesel production from microalgae by supercritical carbon dioxide extraction method. In this research, different stages of biodiesel production from Chlorella vulgaris microalgae, especially the stage of oil extraction from it, were experimentally studied. The method of microalgae cultivation was selected ...

Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...

The field of natural geography, climatology trend in environmental planning Abstract: Ardabil province in the northwest of the country with its long and elongated shape has faced climatic anomalies in recent years such as: increase in temperature especially in winter season, increase in the occurrence of hot winds, increase in evaporation and transpiration potential, decrease in ...

Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...

Master's thesis in the field of civil and environmental engineering. Abstract The main problem in using landfill biogas is the presence of pollutants such as hydrogen sulfide. Hydrogen sulfide gas is colorless, toxic, flammable, and has an unpleasant odor. It is highly toxic and produces SO2 when biogas is burned. In addition, hydrogen sulfide has a corrosive effect. It costs a ...

Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...

Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...

The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...

Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and

Master's thesis in the field of natural geography, climatology and environmental planning, abstract human civilization is based on the stability of climatic conditions, therefore climate change can be considered a threat to human civilization. In recent years, climate scientists have tried to trace these changes for some climatic elements, the most important of which is ...

Dissertation for Master's Degree in MBA General Orientation Abstract: The common destiny of humans has placed planning for the world in a special position, whose inherent differences with planning for companies, non-profit institutions, and international and global organizations have necessitated further exploration. Recognizing the current process of planning for the world was ...

Dissertation to receive the master's degree in civil engineering ""M. Sc"" Major: Water. Abstract The aim of this thesis is to investigate the trend of annual rainfall changes in 37 selected stations in the whole of Iran using non-parametric method. The two Mann-Kendall tests and the age estimator, which are among the most common non-parametric methods, were used for the trend ...

Master's Thesis Field: MBA Abstract About two-thirds of the world's energy is consumed in cities. Along with the many solutions that have been provided to reduce the energy demand, some technologies and researches have also been aimed at optimizing the energy supply. The technology of simultaneous production of electricity and heat is among the technologies that have been ...

Master's thesis abstract shows the necessity of having a healthy environment and raising the health level of the society, the need to have proper planning to reduce the sources of air pollutants production and predicting these pollutants to prevent its harmful effects is inevitable. Prediction of pollutants can be useful in air pollution management and control. In this research, ...

Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...

Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...

Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...

Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...

Doctoral thesis in the field of chemical engineering abstract theoretical and experimental investigation of the continuous process of desalination of heavy crude oil using microwaves and ultrasonic waves Desalination of crude oil is the first step in oil refining, by which the undesirable compounds with the oil are separated before they reach the main unit. In order to reduce ...

Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...

Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...

Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...

Master's Thesis of Chemical Engineering Abstract In this research, the optimal absorption conditions for cationic dyes have been investigated and the removal of brilliant green dye [1] by the natural adsorbent of khakshir has been investigated. First, the effective conditions in the amount of brilliant green removal by the khakshir stem adsorbent were researched, then using the ...

Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...

Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...

Dissertation for M.S.c Master's Degree Orientation: Applied Abstract: In recent years, semi-conducting nanoparticles have attracted a lot of attention due to their electrical and mechanical properties, which result from limited quantum effects compared to their counterpart materials. Among semiconductor nanoparticles, ZnO nanoparticles have higher efficiency. To achieve higher ...

Dissertation for Master's degree (M.Sc) Major: Organic Chemistry Abstract Carbon-carbon bond formation is very important in organic chemistry. One of the reactions that lead to the formation of this bond is the Novnagel condensation reaction. The products of this reaction have wide applications, including in the pharmaceutical, paint, polymer and other industries. . . are In ...

Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...

Dissertation for Master's Degree in Organic Chemistry. Summary of the research done in this thesis consists of two parts, the first part is the synthesis of the precursor of 4,5-dihydropyrrolo[1,2,3-hi]indole-1,2-dione (compound 1) and one-pot, three-component synthesis of new derivatives of spiro terecates in water-green solvent and in the presence of HMTA catalyst. The second ...

Dissertation for Master's Degree in Organic Chemistry Abstract: The new works carried out in this thesis include the condensation reaction of arylglyoxals prepared during the oxidation of acetophenones related to selenium dioxide with 1,2-diaminobenzene, 2,3-diaminomalonitrile, 2,3-diaminopyridine and 4-nitro-1,2-diaminobenzene in order to prepare quinoxalines and the ...

Doctoral Dissertation in Chemical Engineering Abstract With the increase in population, the need for energy resources for mankind has also increased. Diesel, as an effective fuel, fulfills the need for transportation fuel in the world. Biodiesel, which is considered a renewable fuel and produces less harmful environmental effects, is produced from various sources, among which ...

Dissertation: To obtain a master's degree in neonatal special care nursing Abstract Introduction: Premature babies are subjected to many painful interventions during care and treatment, and nurses should use non-pharmacological methods without risk to prevent short and long-term complications caused by pain, so this study was conducted to determine the effect of swaddling on the ...

Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...

Master's Thesis in Electrical Engineering (M. S. C) Major: Power Abstract At present, fossil resources are rapidly running out, and with increasing concern about air pollution and global warming, experts are thinking of using cleaner energy sources and more compatible with the environment. Among these, wind power and solar energy are two types of huge renewable energy sources. ...

Master's Thesis in the field of power, power electronics, power electronics, abstract. Distributed generation power plants have a production capacity of several kilowatts to 10 megawatts, which are used to produce electric energy in places close to consumers. Among their types, we can mention solar cells, fuel cells, micro turbines, wind power plants, etc. If these power plants ...

Dissertation for Master's Degree ""M.Sc"" Chemical Engineering - Environmental Abstract Water produced with oil, which contains a mixture of organic and inorganic compounds, is considered as the biggest waste in upstream oil industries. With the increase in extraction from oil and gas reservoirs, the volume of this water is increasing day by day, and its inappropriate discharge ...

Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...

Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...

Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...

Dissertation for Master's Degree in Chemical Engineering Abstract: Microbial fuel cell biotechnology is a new science, in which microorganisms, as cheap catalysts, convert the chemical energy contained in organic and inorganic compounds into electrical energy. Optimizing parameters affecting battery performance is one of the first laboratory steps towards the development of this ...

Dissertation: To obtain the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract title: Evaluation of the total dissolved solids (TDS) factor in the drinking water of poultry farms in Piranshahr city. Water is considered one of the most important chemical substances in terms of biology and exists in solid, liquid, and vapor forms in nature. Water is one ...

Dissertation for Master's degree (M.Sc.) Title abstract: One-step synthesis of new thiazole and bisthiazole derivatives with various connections. In this research, the synthesis of new thiazole derivatives and bisthiazoles with different connections was investigated by click chemistry and green chemistry methods. First, the synthesis of bisacetophenones (b3-a3) through

Abstract Helicobacter pylori is a gram-negative, spiral-shaped, microaerophilic bacterium that lives in the human stomach. This bacterium is often seen in patients who suffer from chronic gastritis or stomach ulcers. Helicobacter pylori infection is asymptomatic in more than 80% of people. It seems that this bacterium plays a role in maintaining the natural ecology of the ...

Master's Thesis in Agricultural Engineering, Food Industry, Abstract: The effect of the water extract of the monkey flower plant on the storage time and quality of frozen rainbow salmon. Recently, due to the avoidance of using chemical preservatives in the food industry, the attention of researchers has been drawn to the use of natural compounds in order to increase the shelf ...

Dissertation for receiving a master's degree (M.Sc.) in the field of food science and engineering, majoring in food microbiology. Abstract One of the effective ways to improve the quality of bread and baked goods is to optimize the fermentation conditions of the product. In addition to increasing the nutritional value of bread, proper fermentation improves the rheological ...

Master's Thesis in Food Industry (M.Sc) Abstract Walnut kernel is an edible substance that has a lot of fat, protein, sugar and starch, but due to various reasons, it undergoes physical and chemical changes very quickly and loses its quality. The purpose of this study was the effect of packaging and storage conditions on the quality and shelf life of walnuts. In the research ...

Master's Thesis on Automotive Powertrain Abstract In this thesis, which is presented under the title of turbocharger adaptation suitable for EF7 engine in order to improve volumetric efficiency, firstly, the history of the invention and use of turbocharger is discussed. Then, the naturally aspirated and turbocharged engine are compared, the result of which is to clarify the ...

Dissertation: To receive the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract Title: Investigating the contamination of drinking water of broiler farms in Piranshahr city with Escherichia coli bacteria Drinking water is one of the vital and nutritious factors that is necessary for optimal growth and control of body temperature and should always be ...

Master's thesis in the field of medical engineering Abstract of estimation of breathing rate from pulse oximeter signal of people suffering from sleeping sickness: review and comparison of different methods Pulse oximetry is a non-invasive and relatively cheap method for monitoring oxygenated hemoglobin in blood, which works based on the different light absorption of oxygenated ...

Master's thesis in the field of mechanical engineering - energy conversion trend. Abstract Numerical simulation of a flow measurement microsensor in a real human aorta model. Arterial diseases, especially arteriosclerosis and vasodilation, are among the most important causes of sudden death in the world. There are different methods for diagnosing these diseases, and in this ...

Master's thesis in the field of forestry Vegetative, physiological and genetic responses of two Zagros oak species (Q. brantii and Q. libania) under drought stress Abstract Zagros forests account for about 40% of the total forests of Iran and have the greatest impact on water supply, soil conservation, climate adjustment and economic-social balance in the whole country. These ...

Dissertation for M.Sc., Energy Systems Engineering - One of the most important issues related to the environment in the oil, gas and petrochemical industries is the proper disposal of waste hydrocarbon gases in industrial units and complexes. One of the most common methods available for the safe disposal of these gases is burning them in flares and releasing them into the ...

Master's thesis in the field of mechanical engineering in the field of energy conversion. Abstract The increasing use of fossil resources, the increase of greenhouse gases and the strict standards of car pollutants are the main incentive to use biodiesels as an alternative fuel for diesel engines. Air pollution, global warming, limited and expensive fossil resources are among ...

Dissertation for Master's Degree in Environment Abstract Air is considered the most vital element of the environment and its pollution endangers human health. Air pollution is one of the most important environmental issues, which itself can be the cause of many other environmental risks. There are many factors that cause air pollution, and one of the most important of them is ...

Dissertation for obtaining a master's degree in the field of electrical engineering, power orientation Abstract Wind energy will be one of the important sources of electricity in future systems. In this work, an overview of wind energy power electronic control is provided and the development of modern power electronic components is also briefly reviewed. The application of power ...

Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers

Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...

Abstract: In this study, the relationship between ownership concentration, company performance and dividend policy in companies listed in the food and pharmaceutical industries of the Tehran Stock Exchange has been examined. The statistical sample of the research includes 44 companies during the period of 1380 to 1387. The chosen approach for hypothesis testing is the ...

Dissertation for receiving a master's degree in the field: accounting. Abstract One of the existing mechanisms in order to reduce the agency problem and reduce the information asymmetry between shareholders and managers in the capital markets is the corporate governance system. The role of institutional shareholders in corporate governance and their presence in companies has ...

The thesis for receiving a master's degree (M.A) in the field of accounting, the abstract quality of profit from various aspects including (having predictive value, feedback value, neutrality, timeliness and honest expression) has been evaluated and considered by researchers. The purpose of this research is to examine the relationship between some corporate governance mechanisms ...

Dissertation for Master's degree (M.A) accounting field Abstract of thesis (including summary, objectives, implementation methods and obtained results): Net profit is expected to show the result of the performance of an economic unit for a financial period. However, due to having different motivations, management manages profit (increasing or decreasing) and there is a ...

Master's thesis in the field of computer - software engineering. Abstract: The review of car insurance information has shown that factors such as the type of car used, having a driver's license, the type of license and its compatibility or non-compatibility with the vehicle, the amount of the insurance premium, the amount of insurance policy obligations, the quality of the car ...

Master's thesis in medical engineering, bioelectrical trend, abstract of the separation of prosthesis projections and tissue implants in sinogram images of spiral CT scan using active contour methods for metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods, creates an artifact that appears as light and dark ...

The first chapter of research overview 1- Introduction The growth and development of joint-stock companies over time led to the emergence and increase of a class of capital owners who did not directly participate in the management of the companies and guided and monitored the company's affairs through the selection of the board of directors. This new development created a new ...

Thesis for obtaining a master's degree in the field: Chemistry, with a focus on preface. Computational chemistry is a new approach to known and familiar physical and chemical phenomena that can lead to a better understanding of the world around us. Today, with the increasing progress of computers, we are able to study various phenomena in very complex matrices such as biological ...

Dissertation for Master's Degree (M.A.) Major: Information Systems Management Abstract One of the important trends in business and management in the 21st century, which has been seriously raised since the mid-90s, is focusing on the spirituality of employees in organizations. Adherence of public sector servants to ethics and the crystallization of this commitment in their ...

Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...

Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...

Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...

Thesis for obtaining a master's degree in organic chemistry. Abstract: Title: Effective three-component synthesis of new 4-aryl-5-(tert-butylamino)-2-(1-methyl-1H-pyrrol-2-yl)furan-3-carbonitrile derivatives. In this research, a direct and efficient method for preparing new 4-aryl-5-aminofuran derivatives through a three-component one-pot reaction ...

Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...

Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...

Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...

Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...

Dissertation for Master's Degree in Chemistry, Chemistry, Abstract: Epoxy resins, which are thermosetting polymers, have properties such as high thermal stability, good adhesion, high chemical resistance, easy molding, and moisture resistance. These resins are used as adhesives, coatings, paints and polymer tools. The most common epoxy resin is prepared from the reaction of ...

Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...