Download more than 100 examples of thesis, proposal and project topics about numerical analysis in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Thesis - Master's Degree in Geophysics - Winter Seismology 2012 Abstract In this research, the effect of a branch fault in a subduction zone on tsunami waves using numerical modeling of tsunami waves.
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Dissertation of Master's Degree in Industrial Engineering - Systems Management and Productivity Orientation Fall 2019 Abstract: The growing and rapid movement of today's societies to acquire and exploit information, causes an ever-increasing expansion
Dissertation for Master's degree M.se field of remote sensing and geographic information system - water and soil resources Abstract: The phenomenon of dam failure has a catastrophic potential. Therefore, it is important to estimate the hydraulic parameters of flood waves in order to predict risks and manage resources and facilities and save human lives. Therefore, the issue of ...
Master's Thesis of Art Research Abstract Gender in the Qajar era in Iran, which is a pre-modern society, was not a hegemonic or objectified concept, the dual opposition of woman/man in this society has not yet been properly formed, which means that a wide range of different forms of gender and even sexual action with a tolerant approach is understandable and thus acceptable. It ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Dissertation for receiving a master's degree in the field: civil engineering, orientation: structure. Abstract: In this paper, a new approach for optimal selection of acceleration maps and their scaling to perform dynamic time history analysis, to achieve the average response spectrum that has a suitable match and a small distance with the target spectrum and represents the ...
Dissertation for receiving a master's degree in civil engineering, soil mechanics, and the abstract of the contents, one of the most important and at the same time the most difficult topics in soil mechanics is the problem of the stability of gables. Analyzing the stability of soil slopes in order to determine the most probable rupture process or in other words to find the ...
Master's Dissertation of Discontinuous Structure Abstract: In recent years, the use of composite material in the construction and strengthening of structures has expanded greatly. The structure of this material is such that there is a possibility of crack formation between the layers. Due to the increase in load, these cracks grow and cause a sharp drop in the strength and ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Dissertation for Master's Degree in Civil Engineering - Abstract Hydraulic structures in high dams of spillways, as one of the dependent hydraulic structures, have the important role of discharging the incoming floods into the dam reservoir with sufficient safety in free flow or under pressure downstream. In tunnel overflows where the flow is at a high speed and often under ...
Master's thesis in the field of electrical engineering (field) Abstract Analysis, simulation and construction of optimized microstrip antenna or metamaterial roll and use of particle aggregation optimization (PSO) algorithm Microstrip antennas are widely used due to their unique features such as reasonable manufacturing cost and low weight, especially in wireless systems. One of ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...
Master's thesis in the field of electrical engineering - power abstract of the possible analysis of dynamic stability of microgrids, considering wind turbines, in recent years, the high penetration of renewable energy sources, especially wind energy, in power networks has created new problems. One of the most important issues is the uncertainty in the power produced by wind ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...
Master's thesis in the field of mechanical engineering - energy conversion trend. Abstract Numerical simulation of a flow measurement microsensor in a real human aorta model. Arterial diseases, especially arteriosclerosis and vasodilation, are among the most important causes of sudden death in the world. There are different methods for diagnosing these diseases, and in this ...
Thesis Mechanics to get a Master's degree Abstract: First, the solution of Volterra-type anti-plate displacement in a rectangular plate with limited length and width and different boundary conditions is obtained by the method of separation of variables. Then, the distributed displacement technique is used to obtain the integral equations related to the rectangular plate weakened ...
Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...
Dissertation in order to receive a Master's Degree in Rock Mechanics Abstract In open pit mining where many steps are created, it is necessary to conduct stability studies of the wall slope. By increasing the slope angle of the mine, the ratio of tailings removal is reduced, which will save the overall costs of the mine, but on the other hand, it will reduce the safety, in case ...
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Presented to obtain a master's degree in the field of mechanical engineering-applied design orientation. Abstract In this research, we investigated the free vibration of a cracked beam and found its natural frequencies. In the first part, by using the open crack model, by modeling the cracked part as a beam-shaped element and satisfying the boundary conditions, we obtained the ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Master's Thesis, Mechanical Engineering, Energy Conversion, Abstract In this thesis, using the CFD computational fluid dynamics technique, the effect of key parameters such as the effect of secondary inlet pressure on the ejector device, suction ratio, return currents caused by secondary inlet pressure and the effect of all these parameters on the hydrodynamic characteristics of ...
Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering-Manufacturing and Production Abstract Nowadays, due to the need for parts with high strength and low weight, the method of manufacturing parts has become important. Hot gas forming [1] is a new process that, due to the elimination of side operations such as welding, the total weight of the parts is reduced, the ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of three-dimensional heat transfer in traveling wave amplifier collector with input power of 900 and 3000 watts, traveling wave lamp[1] is one of the types of microwave amplifiers. This lamp consists of five main parts, which are electron gun, slow wave structure, wave input and output ...
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Master's Thesis in Geophysics – Seismology 2019 introduction of spectral acceleration maps by probabilistic method for Iran in the range of 44-54 geographic longitude and 40-26-5 geographical latitude based on the analysis
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Doctoral Dissertation on Earthquake Geophysics Science, September 2012 Abstract In this treatise, several combined simulation methods are used in order to produce artificial maps of the earth's powerful movement. Based on this, there are two methods
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in
Dissertation to receive the master's degree of industry group. Desti Bahman 92 Introduction Traditional architecture has been influenced by culture and climate for a long time and this is while in different regions of Iran the climate
Dissertation for Master's Degree in Industrial Engineering, Mehr 2011, Identifying the value[1] of customers, one of the main components of success in the store. There are different types that are more attention today than before
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Thesis of master's degree, field of industrial management, research trend in operations, Shahrivar 2019. Abstract How and what to choose has long been the subject of discussion among philosophers and scientists, therefore, obtaining satisfactory results requires
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Dissertation for the master's degree of the Department of Psychology and Education of Exceptional Children Abstract: The purpose of the present study is to compare the executive functions of children with and without stuttering disorder. This research was of a causal-comparative type, the sample of this research includes 60 children aged 7-11, 30 normal children were selected ...
Dissertation to receive M.A. degree in educational psychology. Abstract Objective: The aim of the present study was to compare short-term memory, accuracy and concentration of 10 and 11-year-old children who learned and did not learn music. Method: The present research method was causal-comparative or post-event. The research sample consisted of 50 music students (with at least ...
Dissertation for Master's degree (M.A.) specialization: Remote Sensing and Geographical Information Systems Abstract The uneven growth and unprincipled urban development due to the incompatibility between different urban uses and the lack of urban unit management has caused problems in the urban system in Region Three (in the area of ??Vanak Square). In this area, the lack of ...
Academic Dissertation for Master's degree in the field: Business Management, International Business. Abstract The use of new quality engineering methods has been increasing in recent years, so that industrial and service companies use these quality engineering methods to produce and provide their products and services in accordance with the changing demands of customers.
Dissertation for the Master's degree ""M.A."" Abstract: The purpose of this study is to investigate the relationship between intellectual capital management and financial performance in Parsian Bank. For this purpose, after reviewing the research literature, 4 hypotheses including one main hypothesis and three sub-hypotheses were formulated. To test the research hypotheses, a ...
Dissertation for Master's Degree in Geography and Urban Planning Abstract Social justice means respecting the rights of others and respecting public interests. In fact, social justice is the result of social evolution. The realization of social justice depends on the proper distribution of urban public uses and services. The purpose of this research is to investigate the ...
Master's Thesis in Electrical Engineering (M.Sc) Major: Electronics Abstract: The increase in demand for portable systems has led the electronics industry to pay special attention to power consumption as an important criterion. Adders are important elements in many digital systems. For this reason, various digital collectors have been proposed in the current era, each of which ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
To receive a master's degree in civil engineering - water Abstract: Relaxation ponds should be designed in such a way that they can depreciate the potential energy stored in the reservoir water of dams and dams in such a way as to transfer it to the natural bed so as not to cause the loss of the bed and in critical conditions to destroy the pond and dam itself. In different ...
Master's thesis in the field of civil engineering (hydraulic structures) abstract of sediment transfer and sedimentation, the consequences such as the creation of sediment islands in the river path and as a result the reduction of flood flow transfer capacity, corrosion of river structures and It includes other problems. Also, suspended sediments affect the quality of water for ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Master thesis M.Sc. Discipline: Civil Engineering, Orientation: Hydraulic Structures. Abstract River containment is generally done by dams and similar structures. The flow passing through these structures has a significant potential for erosion and scouring of susceptible beds. Relaxation ponds are designed and built mainly for the purpose of depleting flow energy and ...
Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Master's thesis in the field of civil engineering - hydraulic structures Abstract: Rivers are one of the most important and common sources of drinking, agricultural and industrial water supply. These resources have many qualitative fluctuations due to passing through different platforms and direct connection with the surrounding environment. Therefore, predicting the quality of ...
Dissertation for the degree of Master of Civil Engineering ""M.Sc."" In this research, an attempt is made to conduct case studies in a number of villages in the cities of Noorabad and Rostam in Fars province to determine the amount and factors affecting the error of the subscribers' meters in the rural water sector under different conditions, and finally, based on that, a ...
Master's thesis in the field of chemical engineering (gas engineering trend) in recent years, many horizontal wells have been drilled around the world. The main reason is the ability to increase the level of the tank in contact with the well, which increases the utilization of the well. Well testing is used to identify the models of hydrocarbon reservoirs and to identify their ...
Master's thesis in the field of civil engineering ""M.Sc. » Orientation: Engineering and Construction Management Abstract: The main goal of this research was to determine the prioritization of the most important factors affecting the productivity of human resources in the implementation phase of the life cycle of urban construction projects. After the investigations, 100 factors ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...